23
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player;
make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
Next, press the play button on your
personal audio player. Adjust the vol-
ume level using the volume increase
and decrease buttons on the console
or the volume control on your personal
audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
1. Select the information mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
The Time/Pulse display will show the total number
of hours the treadmill has been used.
The Distance/Speed display will show the total
number of kilometers (or miles) that the walking
belt has moved.
2. Select the optional screens.
While the information mode is selected, press the
decrease button next to the Home button to select
each of the following screens in the center display:
UNITS
—To change the unit of measurement, press
the Enter button or the Speed increase button. To
view distance in miles, select ENGLISH. To view
distance in kilometers, select METRIC.
DEMO MODE
—The console features a display
demo mode, designed to be used if the treadmill
is displayed in a store. While the demo mode is
turned on, the console will function normally when
you plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the center display. To turn on or
turn off the demo mode, press the Enter button or
the Speed decrease button.
CONTRAST LVL
—Press the Incline increase and
decrease buttons to adjust the contrast level of the
displays.
If a module is connected, you may also select
the following screens:
