6
STEP 1
Fix the Front stabilizer (2) to the Main frame (1)
with the Carriage bolt (17), Arc washer (16), then
fix Rear stabilizer (3) to the Main frame (1) with the
Carriage bolt (13), Arc washer (14), and Acorn nut
(15).
STEP 2
Attach the right and left Pedals (9L/R) to the Crank
(10) respectively. The right Pedal (9R) should be
threaded clockwise. The left Pedal (9L) should be
threaded counterclockwise.
NOTE: The right and left Pedals (9L/R) are marked
“R” for right & “L” for left.
STEP 3
Fix the adjustable device (42) to the Saddle (7)
with Nylon nut (44) anf flat washer (43). Then, fix
the saddle (7) to the horizontal seat post (39) with
a wrench. Fix the Saddle post (6) with Flat washer
(33) and Nylon nut (34), and then insert the Saddle
post (6) with Saddle into the Main frame (1), tighten
with the Knob (31). Fix the horizontal seat post (39)
to the seat post (6) in the main frame (1), secure
with knob nut (36) as shown. Insert the seat post
(6) in the main frame (1) and secure with spring
knob to the height you desire.
Note: When adjusting the height of saddle post, the
maximum insert depth mark line cannot be higher
than the edge of the tube of Main Frame section.
Make sure the sadlle (7) is correctly attached to
the horizontal seat post (39) before starting the ex-
ercice.
