Pro-Form BIOVIBE User Manual Download Page 3

3

WARNING:

To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your vibration platform before using your vibration

platform. ICON assumes no responsibility for personal injury or property damage sustained by or

through the use of this product.

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over the age of 35 or

persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of the vibration platform are

adequately informed of all precautions.

3. Your vibration platform is intended for home

use only. Do not use your vibration platform

in a commercial, rental, or institutional set-

ting.

4. Keep your vibration platform indoors, away

from moisture and dust. Place your vibration

platform on a level surface, with a mat

beneath it to protect the floor or carpet. Do

not place the vibration platform in a garage

or covered patio, or near water.

5. Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

6. Keep children under age 12 and pets away

from your vibration platform at all times.

7. Your vibration platform should not be used

by persons weighing more than 250 lbs.

(113 kg).

8. Never allow more than one person on the

vibration platform at a time.

9. Keep your back straight while using your

vibration platform; do not arch your back.

When standing on the vibration platform,

bend your knees slightly and balance your

weight on the balls of your feet.

10. It is recommended that you use the vibration

platform no more than 15 minutes per day

and no more than 3 times per week.

11. Be careful when stepping down from the

vibration platform; your muscles will feel dif-

ferent after you exercise on the vibration

platform.

12. The following is a list of factors and condi-

tions that may make exercising on the vibra-

tion platform inadvisable (this list is not

exhaustive; it is intended only for reference).

If one or more factors or conditions apply to

you, consult your physician before using the

vibration platform.

• Knee or hip implant

• Pacemaker

• Recently placed screws, pins, bolts, or

spirals

• Acute hernia, discopathy, or spondylitis

• Serious heart or vascular disease

• Acute thrombosis

• Tumor

• Serious migraine

• Epilepsy

• Serious diabetes

• Recent wound due to operation

• Fresh inflammation

• Pregnancy

13. If you feel pain or dizziness while exercising,

stop immediately and cool down.

14. Use your vibration platform only as

described in this manual.

15. When connecting the power cord, follow the

instructions on page 7.

16. Do not modify the power cord or use an

adapter to connect the power cord to an

improper receptacle. Keep the power cord

away from heated surfaces.

17. Never leave the vibration platform unattend-

ed while it is running.

18.

DANGER:

Always unplug the power

cord when the vibration platform is not in

use and before cleaning the vibration plat-

form. Servicing other than the procedures in

this manual should be performed by an

authorized service representative only.

Summary of Contents for BIOVIBE













Reviews: