Pro-Form 525 ZLT User Manual Download Page 32

Part No. 356090 R0114A 

Printed in China © 2014 ICON IP, Inc.

This electronic product must not be disposed of in municipal waste. To  

preserve the environment, this product must be recycled after its useful life 

as required by law.

Please use recycling facilities that are authorized to collect this type of waste in 

your area. In doing so, you will help to conserve natural resources and improve 

European standards of environmental protection. If you require more information 

about safe and correct disposal methods, please contact your local city office or 

the establishment where you purchased this product.

RECYCLING INFORMATION

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to  

provide the following information when contacting us:

•  the model number and serial number of the product (see the front cover of this manual)

•  the name of the product (see the front cover of this manual)

•   the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED 

  DRAWING near the end of this manual)

ORDERING REPLACEMENT PARTS

Summary of Contents for 525 ZLT

































Reviews: