background image

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manu-

al for future reference.

Model No. PFEVEL2785.0

Serial No. 

Part No. 229476 R1005A

Printed in China © 2005 ICON IP, Inc.

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete cus-

tomer satisfaction. If you have

questions, or if there are missing

or damaged parts, please call:

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

UK

email: [email protected] 

www.iconeurope.com

Visit our website at

USER’S MANUAL

Serial Number

Decal

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: 

ICON Health & Fitness, Ltd.

Customer Service Department

Unit 4, Revie Road Industrial Estate

Revie Road

Beeston

Leeds, LS118JG

UK

Tel:

Outside the UK: 0 (044) 113 387 7133

Fax: 0 (044) 113 387 7125

To help us assist you, please be prepared to give the following information:

• the MODEL NUMBER of the product (PFEVEL2785.0)

• the NAME of the product (PROFORM 500 EKG elliptical exerciser)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER and DESCRIPTION of the part(s) (see page 14)

08457 089 009

08457 089 009

PROFORM is a registered trademark of ICON IP, Inc.

Summary of Contents for 500 EKG PFEVEL2785.0









Reviews: