11
11. While another person holds the Console (11)
near the Upright (10), connect the console wire
to the Wire Harness (64). Then, connect the
console pulse wires to the Pulse Wires (63)
Insert the excess wire into the Upright.
Tip: Avoid pinching the wires.
Attach the
Console (11) to the Upright (10) with four M4 x
16mm Screws (78).
11
11
Console
Wire
Pulse Wires
78
63
78
10
64
Avoid pinching
the wires
12. Identify the Right Pedal (35), which is marked
with a “Right” sticker. Orient the Right Pedal
and a Pedal Arm (32) as shown.
Attach the Right Pedal (35) to the Pedal Arm
(32) with three M8 x 40mm Patch Screws (90)
and three M8 Split Washers (97).
Repeat this step to attach the Left Pedal (not
shown) to the other Pedal Arm (not shown).
12
32
97
90
35
Summary of Contents for 480 SpaceSaver
Page 27: ...27 NOTES...
