15
13. Orient the Rear Upright Cover (25) as shown.
Connect the wire on the Receiver (144) to the
Extension Wire (104).
Tip: Avoid pinching the wires.
Attach the Rear
Upright Cover (25) around the Upright (5) by
pressing it into the Front Upright Cover (24).
14. Attach the iPad Holder (83) to the Console (33)
with two M6 x 16mm Screws (123).
24
25
123
83
33
13
14
15.
Make sure that all parts of the elliptical are properly tightened.
Note: Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the elliptical.
12. Identify the Front Upright Cover (24) and orient it
as shown.
Attach the Front Upright Cover (24) to the
Upright (5) with four M4 x 16mm Screws (106).
24
106
12
5
104
144
Avoid pinching
the wires
5
Summary of Contents for 19.0 RE PFEL09812.0
Page 4: ...4...
