Pro-Form 1095 ZLT PETL71709.0 User Manual Download

Page: 11 / 28

OPERATION AND ADJUSTMENT

DANGER:

Improper connection of the equip-

ment-earthing conductor can result in an increased risk of

electric shock. Check with a qualified electrician or service-

man if you are in doubt as to whether the product is prop-

erly earthed. Do not modify the plug provided with the

product—if it will not fit the outlet, have a proper outlet in-

stalled by a qualified electrician.

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant.

IMPORTANT: Never apply sili-

cone spray or other substances to the walking belt or the walking platform. Such substances will deterio-

rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed.

If it should malfunction or break

down, earthing provides a path of least resistance for electric cur-

rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an

earthing plug.

IMPORTANT: If the power cord is damaged, it

must be replaced with a manufacturer-recommended power

cord.

See drawing 1.

Plug the indicated end of the power cord into the

socket on the treadmill.

HOW TO PLUG IN THE POWER CORD IN AUSTRALIA

See drawing 2.

Plug the power cord into an appropriate outlet that

is properly installed and earthed in accordance with all local codes

and ordinances.

IMPORTANT: The treadmill is not compatible

with RCD-equipped outlets.

HOW TO PLUG IN THE POWER CORD IN THE UK

See drawing 3.

Press the pins on the power cord into the metal clips

in the adapter as shown. Close the adapter cover over the end of the

power cord and tighten the screw in the adapter.

IMPORTANT:

Make sure that the adapter cover is secure and the screw has

been tightened before using the power cord.

See drawing 4.

Plug the power cord into an appropriate outlet that is

properly installed and earthed in accordance with all local codes and

ordinances.

Socket on Treadmill

Metal

Clips

Pins

Screw

Adapter

Outlet

Adapter

Cover

Outlet

Power Cord

Summary of Contents for 1095 ZLT PETL71709.0





























Search results

Summary of Contents for 1095 ZLT PETL71709.0

Reviews:

Related manuals for 1095 ZLT PETL71709.0

Brands by name

Popular brands

Pro-Form 1095 ZLT PETL71709.0, User Manual

Search results

Summary of Contents for 1095 ZLT PETL71709.0

Reviews:

Related manuals for 1095 ZLT PETL71709.0

Brands by name

Popular brands