Pro-face Pro-face ST Series, User Manual

Page: 102 / 131

Chapter 7 RUN Mode and Errors
7-3
7.1.2 Via OFFLINE Mode
Touch the MAIN MENU’s RUN selection to start your downloaded “project”. The INITIALIZE area's SET
UP SCREEN feature designates the first screen that appears in RUN mode, and, after this screen appears,
communication with the PLC begins. If, however, the designated initial screen has not been created, or does
not exist, the above display will remain.
E.g.
• To enter OFFLINE Mode, simply touch the top left corner of the ST's screen within 10 seconds
after connecting the ST's power cord.
• After powering up the ST, the initial screen that appears is equipped with a built-
in (invisible) switch in the top left corner. Touch this switch within 10 seconds to
change the ST from RUN to OFFLINE mode.