-16-
* 1 For product details, please contact your local PL distributor or representative.
* 2 Use the [Control Panel] area's [Add/Remove Programs] feature to remove the
[Universal Pointer Device Driver]. Then, install the [Touch Panel Device Driver].
* 3 Use the [Control Panel] area's [Add/Remove Programs] feature to remove the
[Universal Pointer Device Driver].
Use the "RUN" feature to start up the [C:\Proface\Updd\Setup.exe] file. When the
list of drivers appears, select "Digital.TSC-1310D Series.USB" and follow the
instructions given to complete the driver installation.
The connection method used can be via either a serial or USB interface. Also,
the type of OS and Touch Panel Device Driver (mouse emulator) used will
depend on the type of connection method used for the display and for the
touch panel.
Display Type Touch Panel Connection
Touch Panel Device Driver (Mouse Emulator)
Serial (RS-422)
U-T P (Gunze Inc.)
*1 *2
USB
USB T ouch Panel Device Driver
*2
(included with DU)
Serial (RS-232C)
Perform calibration
USB
*3
FP-790
Serial (RS-232C)
U-T P (Gunze Inc.)
*1 *2
PL-DU6900
PL-DU7900
FP-2500
FP-2600
7
When using PL-B920 Series Unit
When the DU display unit is used, the PL's dip switch settings must also be
changed. For details,
BOX-Type Industrial Computer PL-B920 Series User Manual
2.4 PL Part Names and Features
When the connection method is changed to USB, the following BIOS level
System settings must also be changed.
BOX-Type Industrial Computer PL-B920 Series User Manual
Chapter 5 - System Setup
© 2004 Digital Electronics Corporation All rights reserved.
060698G
.PL-HDX920-W2K-MULTI-MM03 2004.5 JM/A
Note
Please be aware that Digital Electron-
ics Corporation shall not be held li-
able by the user for any damages,
losses, or third party claims arising
from the uses of this product.
Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku, Osaka
559-0031, Japan
URL : http://www.pro-face.com/
System Setting Menu
Setting Item
USB Setting
USB Controller
Enabled
Onboard Serial Port 4
Disabled
PnP/PCI Configuration
Assign IRQ For USB
Enabled
Integrated Peripherals
