Chapter 5 - System Setup
5-19
PL-5910 Series User Manual
DMA-0 assigned to
[PCI/ISA PnP]
DMA-1 assigned to
[PCI/ISA PnP]
DMA-3 assigned to
[PCI/ISA PnP]
DMA-5 assigned to
[PCI/ISA PnP]
DMA-6 assigned to
[PCI/ISA PnP]
DMA-7 assigned to
[PCI/ISA PnP]
↑↓→←
:
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix First BIOS
(tm)
Desktop CMOS Setup Utility
DMA Resources
Item Help
Menu Level
Legacy ISA for devices
comPLiant with the
original PC AT bus
specification, PCI/ISA
PnP for devices
comPLiant with the
PLug and PLay standard
whether designed for
PCI or ISA bus
architecture
Selecting DMA Resources from the PnP/PCI Configuration menu and the following
screen will appear.
DMA-0 (1/3/5/6/7) assigned to
This setting designates the type of device assigned to the DMA channel. This function is
available when the [PnP/ PCI Configurations] menu's [Resources Control By] option is
set to [Manual].
[PCI/ISA PnP]......... Select to use a PnP-ready PCI or ISA card.
[Legacy ISA] ........... Select to use a non-PnP ISA card.
The initial settings are all [PCI/ISA PnP].
5.2.9 DMA Resources
