Pro-face PL-5910 Series User Manual Download Page 169

Page: 169 / 184

10-1

PL-5910 Series User Manual

10.1 Regular Cleaning

Chapter

10 Maintenance and Inspection

10.1.1 Cleaning the Display

When the display surface or frame become
dirty, use a soft cloth moistened with neu-
tral detergent to wipe away any dust or
stains.

Do not clean the unit with thinner, organic
solvents, or strong acids.

Do not use sharp or hard objects, such as a
mechanical pencil or screwdriver, to push
on the display. This could damage the unit.

Use the screen protection sheet when us-
ing the PL in extremely dirty or dusty ar-
eas.

Neutral
detergent

Maintenance panel

Display

Protection sheet

Thinner

Organic solvent

Strong acid

1 Regular Cleaning

4 Troubleshooting

2 Usage Lifetimes

5 Periodic Maintenance

3 Part Replacement

Points

Summary of Contents for PL-5910 Series

























































































































































































Search results

Summary of Contents for PL-5910 Series

Reviews:

Related manuals for PL-5910 Series

Brands by name

Popular brands

Pro-face PL-5910 Series, User Manual

Search results

Summary of Contents for PL-5910 Series

Reviews:

Related manuals for PL-5910 Series

Brands by name

Popular brands