4
2. Connecting the GP3000H
Attachment
(1) Before connection, remove the cable's
connector cap and GP3000H connector
cover. To remove the cable's connector
cap, pull out the cable by holding the
cable connector as shown.
• To disconnect the cable from the connector
cap, be sure to hold the cable connector
and pull it out. If you hold other parts of
the cable (lock ring, etc.), the cable cannot
be disconnected.
(2) Insert the cable connector to the
GP3000H cable connector until it clicks.
Match the
points and insert the cable
connector, as shown below.
• Be sure to insert the cable connector as
shown. Failure to do so might result in
damage to the connector.
(3) Turn the cable connector lock ring to
lock the connector, so that the small
mark (for LOCK) on the lock ring is
aligned with the small
mark on the
cable connector.
Removal
(1) Unlock the connector that has been
locked in the mounting procedure. (Turn
the lock ring as shown so that the small
mark is displaced from the
mark).
Then, pull out the cable by holding the
cable connector.
• To disconnect the cable, be sure to hold the
cable’s connector and pull it out. If you
hold other parts of the cable (lock ring,
etc.), the cable cannot be disconnected.
Pull out this cable by holding
the cable connector.
connector cap
GP3000H
cable connector
Match the
points and insert
the cable connector until it clicks.
Lock Ring
Align the small
and
marks to lock
the connector.
2. Pull out the cable by holding
the cable connector.
1. Turn the lock ring to
unlock the connector.
