37/46
4.6 Cable Diagram at the time of replacement
The connetion cable used for GP-37W2 can be also used for GP-4301TM. But, please
note that there are precautions and restrictions as described below.
IMPORTANT
・
Please check the connection configurations GP-4301TM supports with GP-Pro EX
Device/PLC Connection Manual before using the connection cable.
(
http://www.pro-face.com/otasuke/files/manual/gpproex/new/device/index.htm
)
・
The Siemens MPI connection cable, MPI adapter (GP070-MPI-41)
cannot be used.
Please refer to the above-mentioned GP-Pro EX Device/PLC Connection Manual and prepare a connection
cable for GP-4301TW newly.
・
When using Mitsubishi PLC A/QnA series (CPU Direct), please refer the following notes,
o
When using
GP430-IP10-O/ GP430-IP11-O,
Refer > 4.6.1
When using a RS-232C connection cable
>
When using CPU I/F Cable for Mitsubishi PLC
…
o
When using GP2000-CBLA/5M-01 (* including User-created cable)
Refer > 4.6.2
When using a RS-422 connection cable
> When using Mitsubishi A/QnA series（CPU
Direct） connection cable（GP2000-CBLA/5M-01）
o
When using GP2000-CBLFX/5M-01, GP2000-CBLFX/1M-01(* including
User-created cable)
Refer > 4.6.2
When using a RS-422 connection cable
> When using Mitsubishi FX series（CPU
Direct） connection cable（GP2000-CBLFX/5M-01, GP2000-CBLFX/1M-01）
