LED SOLAR MOTION SENSOR LIGHT
PELL0018
Please read these instructions carefully before use and retain for future reference.
•
Avoid locations of high temperature or humidity.
•
If the light output becomes less bright or flashes, place the light unit in a sunny
location to allow the batteries to recharge fully.
IMPORTANT SAFETY INFORMATION
INSTALLATION
•
It is recommended to install the light at about 2.5M or higher above ground.
•
Offer the light unit onto the surface to be mounted and mark the position of the two
mounting holes.
•
Drill two holes the wall where marked with regard to any concealed wiring or
pipework. Fit wall plugs if required.
