3 LED MOTION SENSOR LIGHT
PELL0009
Please read these instructions carefully before use and retain for future reference.
•
Avoid locations of high temperature or humidity.
•
For indoor use only.
•
If the light output becomes less bright or flashes, replace the batteries.
•
Always remove the batteries if the light is not to be used for long periods.
•
Never mix new and old batteries or mix different battery types.
•
Remove the rear cover by prising off using a flat blade in the slot at the bottom edge.
•
Insert the batteries noting the correct polarity and replace the cover.
•
Drill the wall in the required location with regard to any concealed wiring or pipework,
use a wall plug if required and screw in a dome head screw leaving the head 4mm
proud of the surface.
•
Locate the keyhole slot in
the rear of the light unit over
the screw head and ensure
the light is securely fixed.
IMPORTANT SAFETY INFORMATION
INSTALLATION
Keyhole slot
Batteries
