Pro-Elec PEL01364 Instructions Download Page 2

2

OPERATION
•  Allow at least 8hrs for the battery to fully charge initially.

CLEANING & MAINTENANCE

SPECIFICATION

• 

Clean the unit only with a soft damp cloth. Do not use any chemicals, abrasives or 

solvents that could damage the casing or lens.

Solar panel: 5.5V, 0.55W 

Battery: 1 x 18650 non-replaceable. 

LED: 20 x white SMD

Colour LED: 6500K, white. 

PIR: detection wide-angle lens of 90-120 degrees, range 3m. 

Operating modes: 3 modes plus permanently off.

Working time: up to 10 hours.

Dimensions: L124 x W96 x H48mm.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF 

ELECTRICAL & ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical & Electronic 

Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste, 

but kept separate for the treatment, recovery and recycling of the materials used. Contact your local 

authority for details of recycling schemes in your area.

Made in China. PR2 9PP

Man Rev 1.1

NOTE:

 the lamp does not light except in low ambient light levels. 

• 

Press the button once to switch on and press again to turn the lamp off. 

On:

 the lamp remains off and only at low light levels will illuminate on detection 

of motion. The lamp remains illuminated for 15 seconds after motion ceases then 

switches off.

Reviews: