1
Solar Road Stud Light
Model: PEL01350
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
The lamp is rated at IP65 for external use.
WHAT’S INCLUDED
•
Lamp assembly.
•
User manual.
•
The road stud can be either bolted to the surface or affixed using epoxy adhesive.
•
Ensure the surface and the base of the stud are clean before applying adhesive.
Allow at least 8 hours for the adhesive to cure fully.
INSTALLATION
OPERATION
• Allow at least 8hrs for the battery to fully charge initially.
CLEANING & MAINTENANCE
•
Clean the unit only with a damp cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
NOTE:
the lamp does not light except in low ambient light levels.
•
When the ambient light falls below a preset level the LEDs will illuminate
constantly.
