3
•
Offer up the bracket unit so that the mains supply
wiring can be connected to the terminal block as
follows:
Connect the positive supply wire (brown or red) to the
terminal marked L.
Connect the neutral supply wire (blue or black) to the
terminal marked N.
•
Refit the lantern bracket to the wall plate and replace the two domed nuts.
•
Replace the lantern diffuser if removed earlier, by
locating the lugs and rotating to locate securely
and slide in the glazing sheets.
•
Fit an appropriate lamp E27 Max 11W (not supplied).
•
Restore the mains power supply.
•
Attach the capping to the main assembly by engaging the
lugs and turn it to locate securely.
•
Fit the finial onto the capping by turning it until it locks into
place.