2
OPERATION
• Allow at least 8hrs for the battery to fully charge initially.
NOTE:
the lamp does not light except in low ambient light levels.
CLEANING & MAINTENANCE
SPECIFICATION
•
Clean the unit only with a soft damp cloth. Do not use any chemicals, abrasives or
solvents that could damage the casing or lens.
Solar panel: 5.5V, 0.55W
Battery: 1 x 3.7V 2200 mAh Lithium non-replaceable.
LED: 34 x white SMD.
Colour LED: 6500K, white.
PIR: detection wide-angle lens of 120 degrees, range from 8 to 10m.
Operating modes: 3 modes plus permanently off.
Working time: up to 10 hours.
Dimensions: L158.4 x W105.2 x H48mm.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Rev 1.1
1. Solar panel.
2. PIR Sensor.
3. LED function display
4. Operation mode button
1
3
4
2
•
Press the button one or more times to set the mode of operation. The
corresponding indicator LED lights. When there is no operation of more than
30 seconds setting mode is cancelled and the indicator LED extinguishes.
Off:
the lamp is permanently switched off.
At low ambient light levels:
Mode 1:
operates on detection of movement, the lamp
illuminates for 30 seconds at high brightness.
Mode 2:
the lamp is lit at low level and on detection of
movement, the lamp illuminates for 30 seconds at high
brightness then reverts to low level.
Mode 3:
the lamp illuminates and remains lit constantly at
low level. No motion detection.
