2
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
Made in China. PR2 9PP
Man Rev 1.0
SPECIFICATIONS
CLEANING AND MAINTENANCE
•
Clean only with a soft, dry cloth. Do not use any chemicals, abrasives or solvents
that may damage the product.
•
Turn off or isolate the mains supply.
•
Feed the supply wiring through a suitable access
point made in the base plate.
•
Mount the product base onto the wall using a
suitable mounting method ensuring the cutout in the
base is at the bottom.
•
Connect the positive supply wire (brown or red) to
the terminal marked L.
•
Connect the neutral supply wire (blue or black) to the
terminal marked N.
•
Fit the main assembly onto the base and secure
using the two nuts.
•
Attach the diffuser by sliding it into position and
turning it to locate securely.
•
Assemble the diffuser by sliding in the glazing
sheets.
•
Fit an appropriate lamp E27 Max 11W (not supplied).
•
Attach the capping onto the diffuser by engaging the
lugs and turn it to locate securely.
•
Fit the finial onto the capping by turning it until it
locks into place.
•
Restore the mains supply.
INSTALLATION
Voltage
220-240V~50Hz
IP rating
IP44
Lamp type
E27 11W Fluorescent or LED
1
2
3
4
5
6
7
