2
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
Made in China. PR2 9PP
Man Rev 1.0
SPECIFICATIONS
Voltage
220-240V~50Hz
IP rating
IP44
Lamp type
GU10 7W LED
CLEANING AND MAINTENANCE
•
Clean only with a soft, dry cloth. Do not use any chemicals, abrasives or solvents
that may damage the product.
•
Remove the screw from the top of the spike.
•
Fit the spike to the pivot frame using the screw
removed previously.
•
Unscrew and remove the lens from the body.
Turn off or isolate the mains supply.
•
Using an IP65 rated connector housing (not
supplied) connect the positive supply wire
(brown or red) to the terminal marked L.
•
Connect the neutral supply wire (blue or black)
to the terminal marked N.
•
Fit an appropriate lamp GU10 Max 7W (not
supplied) and refit the lens rotating it to locate
securely.
•
Press the spike into the ground and adjust the
angle of the light as required.
•
Restore the mains supply.
INSTALLATION
1
2
3
4
5
6
