Rechargeable LED Work Light
Please read these instructions carefully before use and retain for future
reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the mains adaptor to the mains power supply.
•
Keep the work light out of the reach of children.
•
LED lamps are extremely bright. To avoid possible damage to the eyes, do not
stare into an LED beam.
•
In use, avoid touching any external surface of the work light, due to the possibility
of high temperatures.
•
Do not turn on the light when it is charging.
•
Do not leave the lamp on charge for over 24 hours.
•
Ensure that the IP plug is in place after charging and before use.
•
Do not leave the work light unattended during use.
•
Do not use if the mains adaptor has been dropped or damaged.
•
Do not power the work light using any other mains adaptor, other than the one
provided with it.
•
Do not use the charging unit outside. It is only suitable for indoor use in dry
conditions.
•
There are no user-serviceable parts in this work light. Do not attempt to dismantle
the charger or work light.
•
The internal rechargeable battery cannot be replaced.
•
This appliance is designed for domestic use only and should not be used for
industrial purposes.
•
Do not use in areas where an explosive or chemical atmosphere may exist. Do not
use in areas where ventilation is restricted.
IMPORTANT SAFETY INFORMATION
•
The work light is suitable for both indoor and outdoor use. Do not use the charging
unit outside.
•
The work light must be positioned so that there is at least 1m between the front of
the work light and the surface to be illuminated.
•
Do not use on damp or conductive surfaces such as metal. It should be placed
away from any flammable materials.
•
Connect the mains charger to the mains power supply to recharge the internal
battery.
•
To use, disconnect from the mains power supply, ensuring that the IP plug is in
place. Turn the light on using the on/off switch on the work light.
Models: PEL00018, PEL00019, PEL00020, PEL00021
USAGE
