Rev. 09-15-21
Repeat the two steps above for the opposite bottom corner of the Pro Matte® IV
Green Screen.
4. Hang the Pro Matte® IV Green Screen
Using two people, carefully hang the Pro Matte® IV Green Screen from the 3M
Command® Hooks. Be sure to avoid folding or creasing the Pro Matte® IV
material.
Pull down on the Pro Matte® IV material from the bottom near the 3M
Command® Strips.
Position the bottom of the Pro Matte® IV Green Screen where you want it and
then remove the remaining green liners from the adhesive on the 3M Command
Strips.
Press the Pro Matte® IV Green Screen firmly to the wall applying pressure to the
3M Command® Strips.
Avoid folding or creasing the Pro Matte® IV material as you
carefully pop apart
the 3M Command® Strips at the bottom of the green screen temporarily.
After they are popped apart, press each strip against the wall and against the Pro
Matte® IV material for 30 seconds.
Wait one hour for the adhesive to build.
Pull down on the bottom corners of the Pro Matte® IV Green Screen and click the
3M Command® Strips back together again.
Should you have any problems or questions about your portable green screen, please
email
