11
56713B/K2079B
Revised
2.19.15
ILLUSTRATION 7
.
40. Rotate the tie rod at the pitman arm
1/2
turn and attach it to the bottom of the new
pitman arm. Torque nut to
45
ft-lbs.
41. Assemble and install to the axle the
SWAY BAR LINK
90-2357
with the bush-
ings and
P-843
hardware from pack
90-
6312
.
NOTE: Some models may have a
14mm lower sway bar hole. If so, use the
14mm bolts and hardware from pack 90-
6430, lower bushings and sleeves from
pack 90-6242 on the bottom to attach the
links to the axle.
42. Use the
3/8” X 1 1/2”
bolt and
3/8”
wash-
ers and nuts from
90-6024
to attach the
90-1010
to the sway bar end. Use the
3/8” X 2 1/2”
hardware from
90-6024
to
attach the
90-2357
to the
90-1010.
See
ILLUSTRATION 8
.
43. Repeat on the other side of the vehicle.
44. Install the hose clamps and screws from
hardware pack PN
90-6029
to the brake
lines.
45. Bolt the front brake line extension brack-
ets PN
90-1539
to the original
OE
brake
line bracket holes, on the front axle brack-
ets, using the previously removed
OE
bolts.
46. Secure the
OE
brake lines to the brake
line extension brackets PN
90-1539
using
the supplied
5/16” X 1”
bolt and hard-
ware.
47. Install your wheels and tires and lower the
vehicle to the ground. Tighten the lug nuts
to
90
ft-lbs.
3/8”
Hardware
3/8” X 2
1/2” Bolt
45359
Bushing
61150 3/8”
Sleeve
3/8”
Hardware
3/8” X 1
1/2” Bolt
90-1010
End Link
Sway Bar
90-2039
Spacer
ILLUSTRATION 8
Sway Bar End Link
P-843
Spacer Pack
OR
Hardware
From Packs
90-6430 and
90-6242
SHOCK
UPPER
SHOCK
BRACKET
COIL
ISOLATOR
RETAINER
SHOCK
BUSHING
SHOCK NUT
ILLUSTRATION 7
Coil Spring/Shock
Install
SHOCK
BUSHING
56160 or
56170 COIL
SPRING
RETAINER
