3
3.
Avoid working alone.
Be sure someone is within range of your voice or close enough to come to your aid when you work
near a lead-acid battery.
4.
Stay alert.
Watch what you are doing, and use common sense. Do not operate any charger when you are tired.
5.
Keep children away.
Children must never be allowed in the work area. Do not let them handle machines, tools, battery
chargers, or extension cords.
6.
Keep work area clean.
Cluttered areas invite injuries.
7.
Observe work area conditions.
NEVER smoke or allow a spark or flame in the vicinity of battery or engine. Don’t expose
to rain. Keep work area well lit.
8.
Do not overreach.
Keep proper footing and balance at all times. Do not reach over or across electrical cables or frames.
9.
Avoid electrical shock.
To reduce risk of electrical shock, unplug charger from outlet before attempting any maintenance
or cleaning.
10.
Do not operate charger with damaged electrical cord or plug.
To reduce risk of damage to the electrical plug and
cord, pull by plug rather than by the cord when disconnecting charger. If damaged, replace the electrical cord or plug
immediately.
11.
Store idle equipment.
When not in use, store equipment in a dry location to inhibit rust. Always lock up tools and
equipment and keep out of reach of children.
12.
Maintain charger with care.
Inspect periodically and, if it has received a sharp blow, been dropped, or otherwise
damaged in any way, have it repaired by an authorized technician. Do not disassemble charger; contact PCS technical
support when service or repair is required (800.742.2740). Incorrect reassembly may result in risk of electrical shock or fire.
13.
Check for damaged parts.
Before using any battery charger, carefully check any part that appears damaged to
determine that it will operate properly and perform its intended function. Check for broken parts and any other condition that
may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the charger if any part does not operate properly.
14.
Replacement parts and accessories.
When maintaining, only use accessories intended for use with this charger.
Approved accessories are available from Pro Charging Systems (800.742.2740).
SAVE THESE INSTRUCTIONS!
INSTALLATION AND PREPARATION
To reduce risk of battery explosion, follow these instructions, those published by the battery
manufacturer, and by the manufacturer of any equipment that you intend to use in the vicinity of
battery. Review all cautionary markings on these products and on the engine.
Pour ré
duire le risque d’explosion, lire ces instructions et celles qui figurent sur la batterie.
If it is necessary to relocate the battery for charging, first remove the grounded terminal from the battery. Then make
sure all accessories are off, so as not to cause battery arcing.
RISK OF EXPLOSIVE GASES: WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS
DANGEROUS. Batteries generate explosive gases during normal battery operation. For this reason, it
