background image

Specifications

Length: ..................................................................................................

22 in (550mm)

Beam: ......................................................................................................

9 in (225mm)

Radio: ..................................................................................

2-Stick FM Radio System

Motor: ................................................

550 Electric Motor w/Internal Cooling Fan

Motor Control: .................... Waterproof 

Electronic Speed Control w/Reverse

INSTRUCTION MANUAL

Riptide

EP RTR

5469 Riptide rev.  5/20/03  9:14 AM  Page 1

Summary of Contents for Riptide EP RTR

Page 1: ...0mm Beam 9 in 225mm Radio 2 Stick FM Radio System Motor 550 Electric Motor w Internal Cooling Fan Motor Control Waterproof Electronic Speed Control w Reverse INSTRUCTION MANUAL Riptide EP RTR 5469 Riptide rev 5 20 03 9 14 AM Page 1 ...

Page 2: ...amiya Connector DYN1000 Ni Cd Battery Fast Charger DYN4010 Riptide EP RTR Instruction Manual 1 Carefully remove the boat and radio transmitter from the box 2 Inspect the boat If you notice damage from shipping please contact the hobby shop where you purchased it Inspection 1 Install 8 AA alkaline batteries into the transmitter Be sure each battery cell is installed in the proper polarity The polar...

Page 3: ...e transmitter then the receiver and check for correct operation Move the right stick on the transmitter left and right The rudder should move relative to the stick movement 3 With the propeller free from any objects give some throttle input to ensure that the motor is working If everything appears to be functioning correctly you are ready to run your boat If any of these functions are reversed cha...

Page 4: ...Testing the Boat in the Water Before and at the end of each run make sure that all screws are tight and that the propeller is free from any entanglement Note Running the Riptide in salt water could cause parts to corrode Rinse thoroughly with fresh water after each use If you have any questions concerning the setup or running of the Riptide please call the Horizon Service Center at 877 504 0233 Ma...

Reviews: