V6402, V6404, V6406, V6408
and V6418 HD converters
HU-V6402&4&6&8&18
27
3.1.4
Menu Examples
This section has examples of how to manoeuvre through the menu system. The first one starts with the
unit in its ‘sleep’ mode where the display is blank, and then proceeds to set the reference source to the
processing input (
Vid I/P
).
Action
Display
Comments
Select
V6404SV
Top Level
Select
VIDEO
The Main Menu we want
Select
Source
The first Sub Menu in the list
▼
A/R
▼
Ref Src
The Sub Menu we want
Select
Auto
The default setting
▲
Vid I/P
Set it as we want it
Now we shall select how the unit behaves when the input fails. The following steps should be taken from
the current position (Hold means that you should press and hold the select button for about half a
second):
Action
Display
Comments
Hold
Ref Src
UP to the Sub Menu level
▼
Anc Data
▼
VFL Mode
The Sub Menu we want
Select
Black
The default setting
▲
+ Hold
1 sec
Unit automatically counts up till it comes
to…
Freeze
or do you want it to go 'Black' after 14 sec?
▼
14 sec
Set it as we want it
3.1.5
Sleep
If the front panel is not used for a certain amount of time then the display will automatically go into a sleep
mode when it will be blank. Pressing any of the buttons will cause it to ‘wake up’ back into the top level.
The time delay before the unit slips into sleep mode can be set up using the
ENG’ING
:
Sleep
menu.
The brightness of the display can also be adjusted using the
ENG’ING
:
LEDLevel
menu.
