Vistek V6153,V6154 HD DAs
Issue
2.0
3
1
Description
The V6153 and V6154 are a pair of distribution amplifiers for SDI Video. Both can process both
Standard Definition (SD) and High Definition (HD) video, but the V6153 has eight outputs while
the V6154 has sixteen outputs.
The V6153 is a single width module, while the V6154 is a double width module, requiring a pair
of rear modules. Unlike some double width modules the pair of rears does not need to be
bound together, although the rear overlay covers both actual rears.
Both units are part of the V1600 range of interface modules and are built on a 3U high Eurocard
which can be fitted into a V1606 3U chassis along with any other cards from the range. Unlike
many modules in the range the V6153 and V6154 cannot be used in the V1601 1U Chassis.
This is due to the technical requirements for HD signal bandwidths.
The video data rate is automatically selected from the incoming SDI video and identified as SD
from data rates of 143, 177, 270, 360, 540 Mbits/s or HD from 1.485Gbits/s. A pair of LEDs on
the front panel indicates whether the input signal is present and whether it is SD or HD.
Both DAs include a re-clocker to regenerate the SDI signal, but this can be disabled using an on-
board link. In some installations the use of a non-reclocking DA is preferred to avoid locking jitter
errors into a signal.
Both modules receive all their power and IO signals from the rack through the passive rear
modules.
Both modules are compatible with the DART remote control and monitoring system. They have
no controls but will indicate Signal Present, SDI Standard, SD or HD and whether Re-clocking is
enable or disabled.
