WARNING: This product can expose you to chemicals including Benzene and Ethylbenzene which are known to the State
of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
Troubleshooting
Maintenance
Warning
Zoom In / Out
Installing 3 AAA Alkaline Batteries
• Remove and store batteries when not in use for 90 days or longer
• Clean Flashlight with a clean, dry cloth as needed.
• Lubricate screw threads and moving parts with standard consumer
lubricant as needed
• High Intensity Beam. Extremely bright 300 lumen light
• Do not look directly into light; may cause vision damage
• Follow City Ordinance Guidelines for use &
proper disposal of dry cell batteries
• Recommended for Ages 14+
• Remove and replace batteries
• Be sure tail cap is screwed on tightly, and batteries are inserted properly in battery pack
• Be sure battery pack is properly inserted
• If problem persists, contact Pro-4 Tactical for technical advice
• See www.Pro-4Tactical.com for Warranty and Replacement Information
Zoom In
For a long, narrow, focused light beam:
Pull OUT Flashlight head as shown
Zoom Out
For a broader light beam: Push IN
Flashlight head as shown
1
2
Unscrew tail
cap. Remove
battery pack
Insert battery pack into
flashlight as shown
below. Replace tail cap
Insert 3 AAA batteries according
to polarity (+/-) as indicated on
battery pack
1
2
3
FRESH ALKALINE BATTERIES RECOMMENDED. DO NOT MIX OLD AND NEW, OR DIFFERENT TYPES OF BATTERIES
If the Flashlight does not turn on; works intermittently; or has a weak light:
FLASHLIGHT - COB LANTERN
When using “COB Lantern” mode or “Red Flashing” mode,
extend the Flashlight head to fully expose the COB Lantern.
Exposing Lantern Modes
Striker Head surrounds the flashlight lens. It is capable
of breaking or cracking ice, glass or similar items by
forcefully tapping the edge of striker head against the item
you wish to break.
CAUTION:
Do not use on vehicle windshields, windows or
any other surfaces you do not intend to break.
Unintended scratches can appear by
accident. Wipe down the striker head
with a wet or dry cloth after use to
ensure debris is removed.
Striker Head
1
2
5 LIGHT MODES:
High Power Light
COB Lantern
Low Power Light
Red Flashing
Strobe
1
2
3
4
5
To cycle through light modes (without turning
the flashlight off), press button in halfway. The
button will not click, and the light will advance
to the next mode.
Firmly press the ON / OFF button. You will hear a
“click,” and the light will turn ON. Firmly press again,
and the flashlight will turn OFF.
Note: The next time the button is pressed, the light
will advance to the next mode.
Turning
ON / OFF
Switching
Modes
CLICK
