Assembly
Page GB-12
(7)
5. Place the centre point of the wall mount
(7) on this point.
6. Check the alignment of the wall mount
with a spirit level.
7. Mark the three drill holes.
8. Drill dowel holes in the wall at the marked
areas.
9. Insert the three dowels into the holes.
10. Screw the wall mount to the wall with
three screws.
(7)
(1)
11. Hook the exhaust hood (1) carefully into
the wall mount (7).
(9)
(10)
12. Push back the lock (9) on the grease
filters (10) and carefully remove the
grease filters.
13. Draw the drill holes onto the wall through
the openings inside the appliance.
14. Carefully remove the exhaust hood
again.
15. Drill dowel holes in the wall at the
marked areas.
16. Insert two dowels into the holes.
17. Hook the Exhaust hood into the wall
mount again.
18. Screw the Exhaust hood tightly onto the
wall with two screws. The Exhaust hood
is now secure.
