Operation Page EN-17
mains cord completely to
the yellow marker.
■
Never pull the mains cord
out beyond the red marker.
Pulling the cord out further
can damage the cable reel.
(12)
red
yellow
1. Pull the mains cord (12) out
until the yellow marking is visi-
ble on the mains cord.
If the red marking is visible, the
mains cord has been pulled
out too far. Allow the mains
cord to retract slightly (see sec-
tion "Finishing vacuuming" on
page EN-18).
2. Insert the mains plug (12) into
a properly installed socket.
(3)
3. Use your foot to operate the
on/off foot switch (3), to switch
the appliance on.
4. To vacuum, push and pull the
nozzle across the surface you
are vacuuming. Rotate the tele-
scopic tube handle (14) slightly
to reach corners more effec-
tively. This positions the nozzle
diagonally.
In rare cases this can make a
whistling noise initially. This
is not a malfunction and stops after
a while.
