1
2
3
Cleaning and maintenance
The device should be cleaned and disinfected regularly; please always remove the batteries to do this.
Clean the module by hand; water jets and high pressure cleaners are not suitable.
The surfaces are easy to clean using a watery soap solution or a surface disinfectant.
Cleaning and disinfection are recommended each time the bottle is replaced.
If soaps and creams are used, the pump should be washed carefully with warm water or replaced every three
months. To do this, it should be completely emptied and free from product residues.
Cleaning the dispenser head
1. Turn the device off.
2. Use the universal tool to push the hinge pin
through the shaft axis to remove it.
3. Pull the dispenser head upwards and remove
the hose.
4. Clean as described above.
5. Re-attach the dispenser head and the pump
hose together.
6. Push the hose into the device opening and place
the dispenser head onto it.
7. Push the hinge pin all the way through the
shaft axis to fix the dispenser head into
position again.
8. Turn the device on.
130114_Prisman-Vario_ToucE_A5.indd 11
13.01.2014 14:17:44
