COLOR TEMPERATURE
PACKAGE CONTENTS
SPECIFICATIONS
FEATURES
Lovo™ Slim
LED Recessed Light Kit
ITEM NUMBER
INPUT VOLTAGE
IP GRADE
CRI
CONNECTION
LIGHT SOURCE
POWER CONSUMPTION
LENS ANGLE
SURFACE FINISH
DIMMING
CUTOUT
LUMEN OUTPUT
OPERATION TEMPERATURE
#3170-RCSL4-10W-24V-CCT
24Vdc
IC Rated, IP21
CRI 90
Black, Brush Nickel or Silver
Lovo™ FC In/Out System
10 Watt
120°
White
PWM Dimmable
4.3” (110mm)
•
Before installation, check that the 24Vdc power is off. Unplug
power supply or unplug FC power cable.
•
The LED driver is rated IP20 and the LED recessed light is
rated IP44. This must be maintained during installation.
•
Insulation can be abutted to the LED recessed light module,
but DO NOT fully cover the LED recessed light with
insulation. (See clearance information).
•
If loose fill insulation is used, a barrier is required between
the LED light and loose fill insulation when abutted against
the LED light. We recommend a vapor barrier boot installed
prior to installation for insulated ceiling application. This will
create a proper seal so no cold or hot air enters living space
from attic.
•
LED Power Supply must be mounted in an accessible
location, e.g. by electrical panel, in a closet, above a kitchen
cabinet, etc.
Thank you for purchasing this quality Prism Lighting Group product. To ensure correct function and safety,
please read and follow all
Instructions
carefully before using the product. Please keep instructions for future reference.
DESIGNED AND IMPORTED BY PRISM LIGHTING GROUP™ | NORTH AMERICA | 1-866-620-1380 | WWW.PRISMLIGHTINGGROUP.COM
•
Do not connect LED recessed light to any voltage other than
24VDC, failure to do so may cause permanent damage to the
recessed light.
•
Do not plug the driver to AC outlet before the LED recessed
light is properly connected, it may damage the function of
the LED light.
•
When dimming, only compatible with 24Vdc dimmer
switches or controllers with PWM (Pulse Width Modulation).
•
Locate the driver in a well ventilated and accessible area as
well as free from any insulating material.
•
Do not install or operate LED recessed light kit into a
completely sealed environment or in an environment that has
humidity levels above 70%.
Samsung LED
2700K, 4500K and 6000K Adjustable In-Line Switches
800lm (80lm/W)
Max TA = 45°C
PLG-RCSL4-10W-24V
INSTALLATION REQUIREMENTS
WARRANTY
SAFETY TIPS
•
The LED recessed light and LED driver are not suitable for
120V dimmer switch. Dimming is done on the 24V output side
of the power supply, not on the 120V input side.
•
Take care not to pull any electrical wires during unpacking as
this may damage the connection.
•
Lay out all the components on a smooth surface and make
sure there are no components missing before assembly.
•
Check whether the fitting has been damaged during
transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the
place of purchase for inspection, repair or replacement.
•
Layout your recessed locations first followed by your power
supply location and then your switch location (if applicable)
•
All wiring and installation of the light fitting must adhere to
local and national wiring rules.
•
Always ensure the power is OFF and the fitting has cooled
down before performing any maintenance, cleaning,
changing the globe or adjustment to the fitting.
•
To avoid injury or damage to the fitting, ensure that FC
Connectors are secure before connecting the power.
•
Handle the fitting and cover/shade with care to avoid
breakage.
•
Find a suitable location away from liquids and hazards.
•
Ensure that the fitting does not come in contact with
corrosive chemicals, etc.
•
To clean, wipe with a damp clean cloth. Never soak the fitting
with water.
DIMENSIONS
5.3”D x 1”H (135Dx25mmH)
ENVIRONMENT
Indoor Use
MATERIAL
Heat Conductive Plastic
MAGENTIC TRIM OPTIONS