4. Take the flexible stainless steel pilot hose and connect it to the control box fitting. Secure with
wrench but be careful not to over-tighten as it may damage the brass thread.
5. Attach the gas supply flex hose to the control box gas inlet fitting and secure with wrench.
15.
Place the burner and plate back into position on the fire feature.
16.
Turn on the gas and test for operation. It may take a few tries to purge all the air from the gas
line.
17.
Once the burner lights, turn off the unit and let cool.
Summary of Contents for Hardscapes Moderno 5
Page 20: ...Section 6 Wiring Layout Diagrams...
Page 23: ......
