background image

 

SA160C User guide                                                             Rev 02  -  June 2017                                                                                  Page 7 

Emergency Lowering - Mechanical 

Manual  emergency  lowering  facilitated  by     
pulling the red knob on the lift actuator upwards, 
allowing the lifting bar  to  lower down slowly. 

 

 

 

 

 

 

 

Knee Pad Adjustment  

For knee pad adjustment loosen the two screws. 
Set 1 for  depth and set 2 for height. 

 

The footplate can be removed by lifting from the 
base.  When  re  attaching  please  ensure  it  is   
securely fitted, before using the equipment. 

If  using  the  equipment  to  stand  a  person  onto 
the floor, the brakes must always be applied. 

 

 

Operation  -  General Procedures 

Firstly  ensure  you  select  the  correct  sling  size 
for  the  person  being  transferred.  The  sling 
should  be  fitted  around  the  persons  stomach  / 
lower back and not around the chest. 

Push the SA160C towards the person and apply 
the brakes. 

Extend the carry bar (1) towards the person and 
attach the relevant slings loops to the hooks (2) 
Tension  the  carry  bar  and  lock  into  position    
using the two screws ( 3). 

Use the up function on the handset to raise the 
person into a standing position.  

If you are not using the footplate then the brakes 
must be applied, prior to standing. 

Summary of Contents for SA160C













Reviews: