11
INSTALLATION
3.1.3
Armrest Height
To adjust the height of the armrest
•
Loosen handwheels (I)
•
Slide armrest to desired position.
•
Tighten handwheels (I) when the armrest
is set.
•
Repeat for both armrests – ensure
armrests are set to the same height on
both sides of the chair.
•
Armrests can be lowered to minimum
setting to facilitate side transfer of child
into the seat.
Note:
Product codes 7556 – 7559 are
provided with fixed armrests, and therefore
cannot be adjusted.
3.1.4
Pelvic Strap
When positioning, concentrate on achieving
a good pelvic and lumbar position. Ensure
that the feet are flat to the floor, and readjust
the seat height if necessary to achieve this
•
The strap is secured by pressing the two
Velcro sections together and is released
by pulling the sections apart
When Velcro straps are used, the Velcro
should overlap by at least 75mm (3 inches).
I
