2
Introduction and technical data
Contents
Introduction
2
Technical data
2
Use
2
Safety
3
Composition
4
Function and control elements
5
Assembly
5
Operating the VBT-40
5
Maintenance
5
Spare parts
5
Disposal and protection
of the environment
5
Warranty
6
Technical data
Type
VBT - 40
Bending power:
Flat steel
40x5 mm
Steel rods -
Circular cross section 15 mm
Rectangular
cross section
15 x 15 mm
Steel profiles -
Circular cross section 40 x 40 x 2 mm
Rectangular
cross section
40 x 30 x 2 mm
Weight ca.
8,8kg
Technical and design changes can be made in
further development without a previous
warning. That is why not all dimensions,
notes and information are guaranteed in this
user’s manual. Hence it is not possible to
apply any legal requirements based on this
user’s manual.
Introduction
Thank you for trusting our products. By
purchasing this bending tool, you acquired a
tool that is known for its function. Please
check the machine for missing or damaged
parts first.
Use
The bending tool is required to be used only
with a suitable bench vice. The tool is suitable
for cold bending steel, aluminium, brass and
rods or profiles made of other materials. It is
intended to be used in metalworking and car
repair shops as well as in production of
commercial
and
non-commercial
constructions. This tool is to be used by adults
only.
The bending tool is to be used only
for jobs described above. PRIS is not
responsible for any damages or injuries
caused by incorrect use of the tool. In such
cases the warranty is void.
Summary of Contents for VBT-40
Page 1: ...Vertical Bending Tool PRIS VBT 40...
Page 4: ...4 2 2 3 1 4 5 3...