Priorit PRIODOOR ETX-RDA, Assembly And Operating Instructions Manual

Page: 18 / 21

18
Recommended inspections
PRIODOOR ETX RDA (-H) maintenance record
Project name: Customer:
Address / location Order number:
Article number Serial number:
Date of the check Next check:
General evaluation
Cleanliness
Lettering/labelling
Accessibility
Maintenance work
ITEM
Maintenance tasks
ok
D
e
fe
c
ti
v
e
D
e
fe
c
t
c
orre
c
te
d
1 Check the wiring of the drive for damage
☐ ☐ ☐
2 If limit switches present: Check the wiring of the limit switch for damage
☐ ☐ ☐
3 Check the cleanliness of the ETX-RDA and clean if necessary
☐ ☐ ☐
4
Check the condition of the leaves and seals, make good if necessary and prepare
the corresponding report
☐ ☐ ☐
5
Confirm that the ETX-RDA is opened and closed by the control system and
observe the ETX-RDA, make good if necessary and prepare the corresponding
report
☐ ☐ ☐
6
Confirm the OPEN and CLOSED positions of the limit switches, make good if
necessary and prepare the corresponding report
☐ ☐ ☐
7 Confirm that the ETX-RDA fulfils its function as part of the smoke removal system
☐ ☐ ☐
8 Confirm that the ETX-RDA has been left in its standby position
☐ ☐ ☐
9 Test the function of the chain drive
☐ ☐ ☐
REMARK:
A smoke control damper is generally part of a smoke removal system. For this reason, the whole system
should be checked as specified in the operating and maintenance requirement for the system.