Important Instructions
17
General safety instructions
The operating/assembly instructions must always be stored at the recirculating air unit's place
of usage.
Legally required safety instructions must be posted at a location visible to the users.
All of the safety and hazard information as well as the nameplate must be kept in a legible
condition.
Only use the product in its proper condition.
Observe the technical data in our catalogue or data sheet for each product.
Improper installation can impair the protective function.
Please follow all of the instructions in this operating and maintenance manual.
It would go beyond the scope of this manual to list all of the applicable regulations and
directives. Therefore, always check to ensure that your system corresponds to the applicable
regulations.
Intended usage
The product described in these operating/assembly instructions is built in accordance with the
latest technology and the recognised rules of safety.
It may only:
o
be used for its intended purpose and
o
in a flawless conditions in terms of safety.
Any other usage shall be deemed misuse. PRIORIT shall assume no liability for any damage
or consequential damage resulting from misuse.
Function test, safety inspection, care and maintenance
Commercially available mild household cleansers can be used to clean the outside of the
recirculating air unit.
EBEL:VENT EN-U must be protected from water, penetrating moisture or spray water.
If damage is detected which can impair safety, then this must be repaired using original parts
before further usage.
