Instruction manual
PRIO
LITE MBX 500 - HotSync
PRIOLITE GmbH Wuerzburg - Last revised: 12/2013 - Page 5
Technical data
MBX 500 - HotSync
.
Output:
500 Ws
Voltage supply:
Lithium-ion battery with protection circuit, no
Memory ffect, 16V, 35 Wh, weight approx. 600 g
Modelling lamp:
LED array, equivalent to 80W halogen
Flash recycle time:
2.8 sec. at full power
Fastest flash sequence:
2 flashes per second
Flash duration t0.5 (sec):
1/4500 at full power
Color temperature (K):
5500
f-stop
(1m distance, 7
” reflector,
64,2
ISO100, measuring time 1/125)
shortest sync time:
up to 1/8000 sec. depending on the camera
Sync voltage:
5V for safe flash triggering by modern digital cameras.
socket for 3.5 mm phone jack
Flash power control:
1/10 increments, over 6 f-stops
10 = full power (500 Ws), 5 = min. power (16 Ws)
No. of flashes/charge:
220/full power (display
‘10’), 440/250 Ws (display ‘9’)
more than 6000 at low power
Charger:
16V (Multivoltage)
Charging time:
approx. 2h to 80% and approx. 3h to full charge
Weight (without tilt):
3,2 kg (battery included)
Dimensions (cm x cm):
40 x 17
Code No.:
01-0500-04
Initial operation
.
Set-up and assembly
The compact flash units are equipped as standard with a tilting head. For set-up on
tripods, pantographs or ceiling systems, the tilt is screwed securely onto the
appropriate tripod mount using the locking thumbscrew on the side of the panner.
If the unit is suspended from a pantograph or ceiling rail during operation, a second
secure connection is required in accordance with the applicable safety regulations. It
is recommended to insert a steel cable suitable for this purpose (not included)
through the opening of the handle and to secure it to a suitable lug on the
suspension unit.
