Instruction manual
PRIO
LITE LED 400
PRIOLITE GmbH Wuerzburg - Last revised: 10/2012 - Page 10
An exchange drawer fitted with an original
PRIO
LITE battery (58V) is to be inserted
completely into the opening of the LED 400 unit
with slight pressure.
To do so, use both hands and press index finger
from reverse and thumbs against each other until
the battery drawer clicks in.
Functions on the operating panel
.
Control knob
The control knob is used to set the desired light output in 1/10 increments over a range
from 10 to 5.0. The output is displayed on the two-digit 7-segment display with 10 indicating
maximum power and 5.0 minimum power output.
PILOT function box (LED light)
The LED light is switched on or off by pressing one of
the “PILOT” buttons. Minimum and
maximum output is easily set using the Min and Max button, respectively. Set mode
(control LED lights up) allows for individual adjustment of the light output over the full range
in 1/10 increments by turning the control knob. The selected power output is indicated on
the two-digit LED display.
LED 400 operating panel
From right to left and top to bottom:
PILOT function box (LED Max-Min-Set)
2-digit LED display
Turning knob
Battery drawer with
> Mains switch behind the flap,
> Pull-out handle and upper/lower flap,
> Charging socket and
>
row of LEDs for charging control (top left)
RADIO function box (options for remote control)
1-digit LED-display
Plug-in of the battery
Plug-in of the battery
