Printronix P5000LJ Series, Programmer'S Reference Manual

Page: 77 / 304

The Control Codes
77
The Control Codes
This index lists each printer command by function, ASCII mnemonic, and the
page where the command is explained in detail. “N/A” means not applicable.
The rest of this chapter defines the control code functions for P-Series
Emulation mode. The commands are listed in alphabetical order.
FUNCTION ASCII CODE PAGE
Paper Motion
Form Feed FF 92
Line Feed LF 93
Reverse SFCC } ; n 102
Vertical Tab VT 104
Page Format
Backspace BS 79
Carriage Return CR 81
Forms Length Set (Inches) SFCC INCHES; n.f 92
Forms Length Set (Lines) SFCC LINES; n 93
Line Spacing 1/6 Inch (6 lpi) SFCC 2 94
SFCC LPI
Line Spacing 1/8 Inch (8 lpi) SFCC 0 94
SFCC LPI
Line Spacing 8 or 10.3 LPI ACK 95
(1 line only) SFCC f
Line Spacing 7/72 Inch SFCC 1 95
Line Spacing n /72 Inch SFCC A 96
Line Spacing n /216 Inch SFCC 3 97
VFU Commands N/A 104
Print Attributes
Bold Print SFCC G 80
Bold Print (1 line only) SFCC j 80
Bold Print Reset SFCC H 80
Elongated (Double High) Print,
One Line Only
SFCC h 87
Elongated (Double High) Print,
Set/Reset
SFCC w n 88
Emphasized Print SFCC E 88
Emphasized Print Reset SFCC F 89
Expanded Print (Double Wide)
One Line Only
SFCC k 90
Expanded Print (Double Wide) SFCC W n 90
Overscoring SFCC _ n 97
Print Mode/Pitch Selection SFCC X m n 99
SFCC PMODE; n
SFCC [ n q
Note Some control code functions can be accomplished using another control
code sequence or via control panel selection.