Printronix L1524, Setup Manual

Page: 35 / 148

2–17 Setting Up the Printer
Cable Connections
Connect the interface cable to the appropriate printer interface connector and to
the host computer. (See Figure 2-12.) The printer supports a variety of standard
and optional interfaces:
•
Centronics parallel
•
IEEE 1284 parallel
•
Dataproducts parallel (requires optional cable adapter)
•
RS–232 and RS–422 serial
•
Coax/Twinax (option)
•
PrintNet Ethernet LAN (option)
NOTE: RS–422 can be enabled or disabled via a menu option on the
control panel under the Host Interface selection. Make sure this
selection is properly made for your application.
NOTE: The printer must be properly configured for the appropriate
interface. Refer to the “Configuring the Printer” chapter for more
information.
RS–232/422 Port
Centronics Parallel Port,
Dataproducts Port (with adapter),
or Ethernet
Diagnostic Test Port
Stacker/Stand Control
Figure 2–10. Cable Connections