4
www.printek.com
Close the paper door and push the paper feed button to insure the paper is under the roller
and able to advance. If the printer is properly configured for Black Mark paper the paper
should advance until the black mark is detected by the printer.
Single Sheet Paper -
Insert the single sheet of paper with the coated side down into the top of the printer.
The printer will grab the single sheet and place it into the printer ready to print.
If the printer has received a print job, the printer will begin to print as soon as the paper is
detected.
B. Power On
Depress the Power button on the control panel. The green LED and the red LED will both be lit while
the printer is going through its startup sequence (about 20 seconds). The red LED will go off, leaving
the green LED on to indicate the printer is ready to print.