© 2017 Printek LLC 3515 Lakeshore Drive, St. Joseph, MI 49085 PH:269-925-3200
www.printek.com | E: [email protected]
Control Panel indicators
Control Panel
Power Button
Power Up
Power Down
Toggle IP over USB
on/off
Press & Release
Press & Hold
Press twice
Paper Feed Button
Advance paper
Print Setup Report
Press once(LF) or long (FF)
Press twice
Power & Status
(Green/Red)
Battery
(Yellow)
Alert
(Red)
Indication
On
Off
On
Booting up(
…
20 sec!)
On
Off
Off
Ready
On
Off
Flashing
Paper Error/Lid Open
Flashing
Off
Off
Job is arriving
Flashing
Off
Off
Job is printing
Flashing
Off
Flashing
IP over USB active
On
Charging Battery
Flashing
Battery Low
Flashing
Flashing
Flashing
Restart the printer manually
Off
Off
Flashing
Restore the printer firmware
Off
Off
On
Print head too hot
Self-Test / Configuration print out
With power on, press the Paper Feed button twice quickly.
Accessing the Configuration Menus through USB
1.
Turn the printer ON.
2.
Connect a USB cable between the printer and a PC.
3.
To access the I-820 web page, push the Power button twice rapidly. This will put the printer into Configuration mode.
4.
When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
A. Open browser on your PC and type 169.254.200.1 into the address bar of the browser and hit Enter - A login box should appear:
B. Type “0000” and hit Enter- you should now be at the home page for I-820 Configuration.
5. Push the Power button twice rapidly to exit Configuration Mode.
I-820 Quick Start Guide
