background image

17 

 

PRINCETON DIGITAL (USA) CORP. 

 

Your LCD monitor from Princeton Digital purchased in the United States and Canada is warranted to be 
free from defect in materials or workmanship for 
parts, labor and LCD panel and Backlight for the periods of time set forth in the chart below: 
1 years Parts 
1 year LCD Panel & Backlight 
1 year Labor 
All warranty periods begin from the date of the monitor’s original retail purchase, as brand new product. If 
unit was purchased as a demonstration or 
evaluation unit, warranty period begins from original reseller purchase date. If demonstration or evaluation 
unit is resold at a later date, reseller is responsible 
for declaring status to user and unit is sold “as is” condition and with the remaining warranty period from 
original reseller purchase date. If the monitor fails to 
conform to this warranty, we will replace it with a new or refurbished monitor or repair it using new or 
refurbished parts. Refurbished units (meaning working 
product with minor cosmetic damages) warranty period, if any, will be established at time of sale from 
manufacturer. 
To obtain warranty service in the United States, you must return the LCD monitor within the warranty 
period together with the original or a machine 
reproduction of a dated proof-of-purchase document describing it and a return merchandise authorization 
to an authorized service center, transportation 
charges prepaid. To obtain the name and address of the nearest authorized service center and a return 
merchandise authorization, 
call 1-800-747-6249. (English Only) 
This warranty does not cover defects, malfunctions or failures resulting from shipping or transit accidents, 
abuse, misuse, operation contrary to furnished 
instructions, operation on incorrect power supplies, operation with faulty associated equipment, 
modification, alteration, improper servicing, tampering or 
normal wear and tear or LCD monitors on which the serial number has been removed or defaced. Interface 
cards, cables or mishandling are not covered by 
this warranty. LCD panel pixel defects within the panel manufacturer’s specifications or mishandling of the 
LCD display by applying excessive pressure to the 
panel are not covered under this warranty. 
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE SHALL 
BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY 
AND ALL LOSSES AND DAMAGES RESULTING 
FROM ANY CAUSE WHATSOEVER, INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR 
DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE 
DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE 
MONITOR. WE SHALL NOT BE RESPONSIBLE FOR 
LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. 
SOME STATES DO NOT ALLOW LIMITATIONS ON 
HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL 
OR CONSEQUENTIAL DAMAGES, SO THE 
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific 
legal rights, and you may also have other rights which 
vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or 
to grant any other warranty. 
 
. 2003-2005 Princeton Digital (USA) Corp. All rights reserved.          Warranty Revision C 02/02/04

 

Summary of Contents for VL1919


















Reviews: