SMC
There is a standard SMC (SmartMedia Card)
external interface which supports cards of
6MB/32MB/64MB/128MB capability on the
piano. It is compatible with the file system
format of the MS-DOS FAT 12/16. Press the
[LOAD], [SAVE], [UTILITY] button separately
to enter the relative function. The SMC Icon is
illuminated on the LCD. If there is no card, "NO
SM Card" will display for three seconds, then
exit & return to the previous status.
Load file
Press the [LOAD] button. The SMC icon is
illuminated on the LCD. Three file types which
will be loaded and will be displayed on the
lattice area. The current type is highlighted. You
can select types with the dial or the [+] & the [-]
button.
If there is no file in the SMC, it will display "No
File Found", and return to previous menu by
pressing the [BACK] button.
Load MIDI File
Select the menu "Load MIDI File" & press the
[NEXT] button. The playing modes are
displayed on the lattice area. They're "Single
Play" & "Chain Play". the current mode is
highlighted. Single Play means only playing the
current file repeatedly. Chain Play means
playing all the files circularly. You can select
your desired mode with the dial or the [+] & the
[-] button.
Press the [NEXT] button. All the MIDI files in
the root of SMC are displayed on the lattice area.
The main name of the current file is highlighted.
It includes 8 characters. The postfix name is
MID. You can select files with dial or the [+] &
the [-] button.
Press the [START/STOP] button to start playing
the file selected. The SMC icon flashes. The
current tempo is displayed in the TEMPO area.
The MEASURE and the BEAT areas display
nothing. To stop playing the files, press the
[START/STOP] button.
When the file is playing, you can select the other
files with the dial or the [+] & the [-] button,
then press the [START/STOP] button to stop or
press the [START/STOP] again to play the new
file.
When the file is playing, you can adjust the
tempo with the [TEMPO +],[TEMPO -] button.
Press the [TEMPO +],[TEMPO -] button at the
same time, the current tempo will be set to the
default tempo.
Note:
If the track number of the file is over 24,"File
Track Error" will be displayed temporarily on
LCD and it will exit SMC status.
If the tick number of one beat is over 960 or
below 24, "File Format Error" will be displayed
temporarily on LCD and it will exit SMC status.
If the file is not a MIDI format, "Not Midi File"
will be displayed temporarily on the LCD and it
will exit SMC status.
Load Memory File
Select the menu "Load Memory File" & press
the [NEXT] button. All the MEMORY files in
the root of SMC are displayed on the lattice area
with two lines. The current file is highlighted.
The main name of the file includes 8 characters.
The postfix name is MEM. You can select files
with dial or the [+] & the [-] button.
Press the [NEXT] button to load the file, then
the data will overwrite all the memories,
"Operation Completed" is displayed temporarily
on the LCD. It will exit the SMC function and
return to the previous state.
Load Song File
Select the menu "Load Song File" and press the
[NEXT] button. All the RECORD files in the
