Princeton Instruments PI-MAX4, Manual

Page: 182 / 326

182 PI-MAX
®
4 System Manual Issue 9
2.
After the alignment and focus, the PI-MAX4 system needs to be put into DIF mode. On
the
Setup —> Hardware Setup —> Controller/Camera
tab, select
Dual Image
Feature
as the
Readout Mode
, and then click
OK
.
3.
The PI-MAX4 must be configured for
Gate Mode
in order for the intensifier to operate
properly. Either click on the Gate mode button on the Custom Toolbar, or select
Gate
Mode
on the
Acquisition —> Experiment Setup… —> Main
tab. See Figure 10-14 .
Figure 10-14:WinX Experiment Setup Dialog: Main Tab
4.
On the
Acquisition —> Experiment Setup… —> Timing
tab, verify that
Dual Trig.
Mode
is the selected timing mode. Additionally,
Continuous Cleans
is recommended
for DIF. See Figure 10-15 .
4411-0139_0093