Princeton Instruments PI-MAX4, Manual

Page: 124 / 326

124 PI-MAX
®
4 System Manual Issue 9
6.5.3 Swept Gate Experiment [Variable Width, Variable Delay]
The procedure for conducting a Swept Gate experiment with variable width and variable
delay is the same as that for conducting a Swept Gate experiment with fixed width and
variable delay with the following parameter configuration changes:
• Starting Gate Delay
value does not equal
Ending Gate Delay
value;
• Starting Gate Width
value does not equal
Ending Gate Width
value.
Refer to Section 6.5.3, Swept Gate Experiment [Variable Width, Variable Delay] , for
additional information.
6.5.4 Static Gate Experiment [Fixed Width, Fixed Delay]
The procedure for conducting a Static Gate experiment is similar to that for conducting a
Swept Gate experiment with the following parameter configuration changes:
• Gate Mode
:
Repetitive
;
• Gate Width
and
Gate Delay
must be entered on the
SuperSYNCHRO Timing
expander as shown in Figure 6-26 .
Figure 6-26: Repetitive Gating Setup Dialog
Refer to Section 6.5.4, Static Gate Experiment [Fixed Width, Fixed Delay] , for additional
information.
44
11-
0139
_0085